YX-CYP Belt Sampling and Sample Preparation System
Standard instrument configuration:
YX-CYP Belt Sampling and Sample Preparation System, 1 set
Category:
Sampling & Preparation Equipment
Keywords:
Analysis instrument
- Product Description
- Technical Features
- Technical Specifications
-
- Commodity name: YX-CYP Belt Sampling and Sample Preparation System
- 仪器标准配置: YX-CYP Belt Sampling and Sample Preparation System, 1 set
- 技术特点: It employs a microcomputer to achieve automatic control, automatic temperature stabilization, and automated testing; ◎ A single test can simultaneously determine the density of four samples; ◎ The instrument effectively addresses the high viscosity of crude oil, eliminating the need to set excessively high test temperatures; the sample surface remains level and the graduated cylinder markings are clear, ensuring highly accurate test data.
The primary sampler is installed at the midsection or head of a belt conveyor and directly collects sub‑samples from the moving horizontal or inclined conveyor belt. It is widely used for fully automatic sampling on belt conveyors in mines, power plants, steel mills, cement plants, and port terminals.
Conform to the standards
GB/T 483 General Provisions for Coal Analysis Test Methods
GB/T 3715 Terms Related to Coal Quality and Coal Analysis
GB/T 19494.1 Coal Mechanical Sampling — Part 1: Sampling Methods
GB/T 19494.2 Mechanized Coal Sampling — Part 2: Preparation of Coal Samples
GB/T 19494.3 “Mechanized Coal Sampling — Part 3: Determination of Precision and Bias Testing”
Equipment Composition
The system comprises a sampling machine, a feeding belt conveyor, a sealed ring‑hammer crusher, a splitter, an automated sample collection device, a reject‑return system, and a control system.
Product Introduction
The primary sampler is installed at the midsection or head of a belt conveyor and directly collects sub‑samples from the moving horizontal or inclined conveyor belt. It is widely used for fully automatic sampling on belt conveyors in mines, power plants, steel mills, cement plants, and port terminals.
Working principle
The primary sampler, according to its programmed sequence, rotates the sampling head once at fixed time intervals to collect a subsample. The subsample is conveyed via a chute into the feeder, which continuously and uniformly feeds it into the crusher. The crusher reduces the material to the specified particle size, after which the crushed subsample passes to the secondary feeder. A secondary sampler then performs a second sampling and reduction, and the final sample is collected in the sample collection tank. Any remaining material is returned to the main material stream by equipment such as a bucket elevator or a screw conveyor.
Key words: -
◎ The sampling head is manufactured from highly wear‑resistant steel, with wear‑resistant cutting edges at both ends of the opening. Its bottom contact surface with the conveyor belt and the rear baffle are both fitted with elastic, wear‑resistant rubber pads, while the rear baffle is equipped with a steel brush sweeper. During operation, it performs a rotational cutting motion perpendicular to the material flow. An arc‑shaped idler roller is installed beneath the belt (optional based on site conditions), ensuring that the wear‑resistant pads remain tightly pressed against the conveyor belt during sampling to achieve complete material collection.
◎ The sampling head is equipped with a safety limit switch, effectively preventing maloperation of the sampler and ensuring that the sampling head does not rest on the belt surface.
◎ The splitter employs a belt‑type reduction method; it features a compact design, and its reduction ratio can be adjusted as required.
◎ The sealed design enables operation in dusty, contaminating environments at the discharge outlet.
◎ The system’s PLC control section utilizes well-known brands such as Siemens, enabling seamless communication with field network interfaces.
◎ The PLC control system initiates startup with time delays following the process sequence and shuts down with time delays in reverse order. This ensures that, for the entire system, no residual material remains either at the completion of each sampling cycle or at the start of sampling, thereby providing safety protection while guaranteeing that each sampling operation is unaffected.
◎ The flow sensor enables the sampling head to operate within a specified flow range, preventing empty sampling or over‑sampling and ensuring that the collected subsamples are representative.
◎ Metals in the material stream are removed by a magnetic separator, ensuring that ferrous fragments do not enter the crusher and thereby safeguarding the proper operation of the crushing system.
◎ The belt conveyor and the sample‑reduction belt conveyor feature a fully sealed design, ensuring excellent containment to minimize sample moisture loss while effectively preventing material spillage.
◎ Currently, in the sampling‑machine industry, when the material being sampled—primarily coal—has a moisture content of 12% or higher, the crusher frequently experiences severe sticking and blockages, leading to unstable operation of the entire sampling system and introducing errors into the sampling data. Moreover, crusher clogging often necessitates shutdowns for maintenance, causing significant disruptions and operational challenges for end‑users. To address the persistent issue of sticking and blockages in crushing systems caused by high moisture levels, Youxin Machinery’s R&D team has, through relentless effort, developed a vertical, screenless composite crusher specifically designed for handling high‑moisture materials—primarily coal. Even when sample moisture reaches approximately 25%, the crusher continues to operate smoothly without any sticking or blockage, effectively resolving the problem of equipment instability and frequent shutdowns for maintenance that previously resulted from crusher clogging during sampling. This innovation also enhances the precision of sample preparation.
-

Previous page
Our service network covers the entire country.
24-hour on-call service to resolve issues promptly.
We have service centers nationwide, offering prompt in-home installation and guidance to resolve after-sales issues.
One-year warranty, lifetime maintenance, and free software upgrades, installation, and commissioning.
24-hour service, free operational training—ensuring customers enjoy five-star, worry-free after-sales support.
Previous page
Related products
Consult now
If you are interested in our products, please leave your contact information, and we will get in touch with you as soon as possible. Thank you!