Liaoning Dongfang Power Generation Co., Ltd.


Liaoning Dongfang Power Generation Co., Ltd. was registered with the Fushun Municipal Administration for Industry and Commerce on October 9, 2002. The legal representative is Shi Jianjun, and the company’s business scope includes thermal power generation and electricity supply, electricity sales, heat supply, as well as the leasing of power-generation equipment and related facilities.

Liaoning Dongfang Power Generation Co., Ltd. uses the following equipment manufactured by Changsha Youxin Instrument Manufacturing Co., Ltd.:

YX-DL8500 Automatic Sulfur Analyzer

Technical features:

1. Adopting a horizontal integrated design, the instrument seamlessly integrates components such as the automatic sample‑feeding and injection system, the high‑temperature pyrolysis furnace, the electrolytic cell, the stirrer, and the air‑purification system, resulting in a more compact, rational, and stable overall structure.

2. A specially designed flat-bottomed corundum ceramic boat is used to minimize sample sticking. Program-controlled operation enables automatic heating, temperature regulation, sample introduction, and analysis; results are automatically saved and printed, and samples can be added mid‑run, significantly enhancing work efficiency and enabling truly unattended operation.

3. The determination is performed using coulometric titration, with the measurement time automatically adjusted according to the sample type; this method offers faster analysis than the Eschka gravimetric method and the high‑temperature combustion–neutralization method.

4. A linear electrolyte concentration acquisition circuit is employed, effectively addressing the issue of electrolyte over‑consumption.

5. It employs a contactless switch and features open-circuit protection, hardware over-temperature protection, and measures to prevent electrolyte backflow.

6. A multi-point dynamic coefficient correction method is employed to ensure higher accuracy in test results for coals with high, medium, and low sulfur contents.

7. Can be integrated with the laboratory management system to ensure that balance data is not stored locally and that test results are backed up and uploaded.

8. It can be used to determine the total sulfur content in samples such as solid hazardous waste.

YX-H5510 Infrared Hydrogen Analyzer

Technical Features

1. It can perform a single batch of 39 sample analyses; an optional sample tray for 78 samples is available. The instrument automatically feeds, dispenses, and cycles through tests, requiring no manual intervention throughout the entire process after sampling. During analysis, samples can be added, removed, or replaced at any time.

2. With a horizontal configuration, the instrument can be placed on a laboratory workbench, facilitating convenient operation for users.

3. Advanced PID control is employed for temperature regulation, achieving a furnace temperature control accuracy of ±1°C and a constant‑temperature chamber and gas storage tank temperature control accuracy of ±0.1°C.

4. An absolute pressure sensor is used to monitor the pressure throughout the instrument’s entire gas path, enabling automatic leak testing of the entire gas circuit as well as the furnace chamber, infrared cell, thermal conductivity cell, and gas storage tank.

5. The instrument determines carbon and hydrogen contents by infrared spectroscopic absorption and nitrogen content by thermal conductivity.

6. Fast testing speed and a high degree of automation; the analysis time for carbon, hydrogen, and nitrogen is approximately 4 minutes.

7. During the experiment, you can select the “Automatic Cooling After Experiment Completion” option. Upon completion, the computer will shut down automatically and the instrument will cool down on its own, enabling unattended operation without requiring personnel to manually cool down and power off the equipment after testing.

8. Experimental reports can be customized according to customer requirements, thereby reducing the customer’s workload.

9. Can be integrated with the laboratory management system to ensure that balance data is not stored locally and that test results are backed up and uploaded.

YX-GYFX7705 Fully Automatic Industrial Analyzer

Technical features:

1. The instrument employs a multi-furnace, dual-balance configuration; the volatile‑matter analysis module is equipped with a dedicated temperature‑controlled chamber and requires no external gases. Moisture, ash, and volatile matter can be determined either in any combination or individually. Using the rapid method, simultaneous determination of these three parameters for 19 samples can be completed within 100 minutes.

2. Employing thermogravimetric analysis, the system features automatic sample weighing, automated sample introduction, automatic data processing, result calculation, report generation, and data storage, enabling unattended operation.

3. During the experiment, there is no need to remove or replace the crucible lid, nor to load or retrieve samples. A pneumatic lid‑flipping mechanism is employed, protecting operators from high‑temperature radiation and burns. Compressed air can be supplied either from bottled gas or a silent air compressor to power the pneumatic system and assist combustion.

4. Can be integrated with the laboratory management system to ensure that balance data is not stored locally and that test results are backed up and uploaded.

YX-ZR9704 Automatic Calorimeter

Technical Features

1. Employing advanced multi‑probe temperature‑sensing technology, the system continuously monitors the inner‑cylinder water temperature, the outer‑cylinder water temperature, the ambient room temperature, and the temperature‑controlled tank water temperature. Equipped with a constant‑temperature water circulation system, it supports both adaptive‑temperature and set‑temperature operating modes. In adaptive‑temperature mode, the water temperature tracks changes in the room temperature, effectively addressing the issue of heat exchange between the outer‑cylinder water and the indoor air that occurs during testing under the set‑temperature mode, thereby eliminating the primary factor that can compromise calorimeter measurement results.

2. A unique pump‑circulation method ensures uniform temperature distribution throughout the calorimeter, thereby guaranteeing the accuracy of the test results.

3. Equipped with a self-developed automatic oxygen‑injection and venting device and an automated oxygen‑bomb lifting mechanism, it eliminates the need for manual oxygen charging and venting, achieving a high degree of automation and ensuring simple, convenient operation.

4. Utilizing imported insulation materials, the instrument effectively isolates itself from external environmental influences, resulting in enhanced anti-interference performance.

5. Equipped with a high-precision probe-type electronic measuring cup, it eliminates the need for manual water weighing and automatically measures the water volume in the inner cylinder. With a repeatability error of less than 0.5 g, it delivers more accurate water measurements, shorter test times, rapid and precise results, and simple, convenient operation.

6. Automatic ignition wire detection function, accurately identifying defective ignition wires.

7. Can be integrated with the laboratory management system to ensure that balance data is not stored locally and that test results are backed up and uploaded.

8. For solid waste samples, optional accessories such as a specially designed oxygen bomb and crucibles are available.

9. An optional oxygen bomb gas collection device is available for collecting gases inside the oxygen bomb.

YX-WK7330 Fully Automatic Moisture Analyzer

Technical Features

Sample weighing is automatically controlled by the computer, with automatic determination of moisture content via drying; results are automatically calculated, saved, and printed. It features a built-in precision electronic balance, ensuring accurate and reliable weighing.

It features a nitrogen‑purging test function and employs a compact nitrogen‑purging test chamber, significantly reducing nitrogen consumption, and can be used to test all types of coal.

It employs infrared heating, forced-air drying, and an all-stainless-steel inner chamber, offering excellent reflectivity and uniform furnace temperature.

Inspection drying can be performed, and the inspection timing is customizable.

Standard test durations may be employed, fully complying with arbitration laws, and the results are admissible in statutory arbitration.

Equipped with a large observation window, it allows for clear, real-time monitoring of abnormal test conditions.

7. Can be integrated with the laboratory management system to ensure that balance data is not stored locally and that test results are backed up and uploaded.

Quality is the foundation of any enterprise. To enhance product quality, the company has adopted military‑grade aging processes and independently developed MCPC technology, significantly improving product reliability and stability. Among its offerings, the YX‑ZR calorimeter series, the YX‑DL fixed‑sulfur analyzer series, the YX‑GYFX industrial analyzer series, the YX‑CHN carbon–hydrogen–nitrogen elemental analyzer series, the YX‑HRD ash‑fusion‑temperature tester series, and the YX‑WK automatic moisture analyzer series—these coal‑quality testing instruments have all been included in the higher‑vocational‑education textbook “Coal Quality Analysis,” edited by Li Chunyi of the Inner Mongolia Chemical Vocational College and published by Beijing Institute of Technology Press, where they are presented in detail as teaching aids.

Related Cases


Panjin Inspection and Testing Center

The Panjin Inspection and Testing Center was established on February 2, 2015. It was formed by consolidating eight inspection and testing institutions under the jurisdiction of eight municipal industry authorities, and is a government‑affiliated public institution at the county‑level, directly subordinate to the municipal government.


Coal Science (Tianjin) Coal Testing Co., Ltd.

Coal Science (Tianjin) Coal Testing Co., Ltd. is located at Building No. 93, Beijian Yuan Zhuang, north of Jinggu Road, Tanggu, Binhai New Area, Tianjin. The company was registered with the Administration for Industry and Commerce on May 11, 2011, with a registered capital of RMB 1.354 million. Over the past 11 years of growth and development, we have consistently provided our customers with high-quality products, robust technical support, and comprehensive after-sales service. Our primary business includes quality testing, technical consulting, and technical services for coal, coke, and other coal-related products.


Bayannur City Product Quality Inspection Center

The Bayannur City Product Quality Inspection Center was established on May 8, 2021, through the integration of the former Municipal Product Quality and Metrology Inspection Institute and the Municipal Food and Drug Inspection Institute. It also bears the additional designation of the Bayannur City Tianfu Hetao Quality Standards Inspection and Research Center, operating under a single institutional framework with two names. The Bayannur City Product Quality and Metrology Inspection Center (Bayannur City Tianfu Hetao Quality Standards Inspection and Research Center) is a public‑service institution directly affiliated with the Bayannur City Administration for Market Regulation, with an institutional rank equivalent to that of a department‑level unit.


Huaxin Cement (Luquan) Co., Ltd.

Huaxin Cement (Luquan) Co., Ltd. was formerly known as Kunming Chongde Cement Co., Ltd. and was subsequently acquired by Yunnan Huaxin Building Materials Investment Co., Ltd. The company is situated along the picturesque Zhangjiu River in Chongde Township, Luquan County, Kunming City, approximately 60 kilometers from Kunming and 7 kilometers from Luquan County seat. On August 16, 2018, construction officially commenced on a new dry-process cement production line with a daily clinker capacity of 4,000 tons. This project is a key poverty‑alleviation initiative for Luquan County, designated as a priority project by both the Yunnan Provincial Government and the Kunming Municipal Government, with a total investment of RMB 800 million. The plant was commissioned and began operations on August 29, 2019, achieving an annual cement output of up to 1.6 million tons. Its “Shilin” brand cement has been recognized as a renowned brand and a well‑known trademark in Yunnan Province, meeting international standards. The company’s flagship products include “Shilin” P.O 42.5 ordinary Portland cement, P.C 42.5 composite Portland cement, and M32.5 masonry cement, which are widely used in major national projects such as the Central Yunnan Water Diversion Project, the Yongda Expressway, and the Chuxiong–Dali Expressway, as well as in local civil infrastructure.


Huaxin Cement (Kunming Dongchuan) Co., Ltd.

Huaxin Cement (Kunming Dongchuan) Co., Ltd. was established on September 11, 2008, and is a wholly owned subsidiary of Huaxin Cement Co., Ltd. With a registered capital of RMB 420 million and a site covering 210 mu, the company operates a fully integrated production line that spans from quarrying to cement manufacturing. Employing a state-of-the-art dry-process kiln with external decomposition technology, it has an annual capacity of 1 million tons of high‑quality cement. The company primarily serves key national hydropower projects under the “West-to-East Power Transmission” initiative, such as the Baihetan and Wudongde dams, and currently serves as the specialized cement supplier for China’s second-largest power station—the Baihetan Hydropower Station.


Changchun Institute of Architecture

Changchun Institute of Architecture is a private, general‑purpose undergraduate institution that places engineering at its core, with coordinated development across multiple disciplines—including engineering, management, humanities, agriculture, arts, and medicine. The university was founded in June 2000; in February 2004, it was officially recognized by the Ministry of Education as an independent college offering regular undergraduate programs; and in April 2011, it received formal approval from the Ministry to transition into an independently established private undergraduate university. In December 2017, it was designated as a project‑based institution authorized to confer master’s degrees in Jilin Province; in January 2019, it was named one of “Jilin Province’s Top Ten Universities for Reputation”; and in March 2019, it was included in the third edition of the “Top 100 Private Institutions of Higher Education in China.”